Specifications

Main Drive: geared electric motor 415V 4.5kW, chain drive, frequency inverter control.

No. of Roll Stations: 6

Shaft Diameter: 40mm

Roll Tools: AISI grade E52100 / DIN grade 100Cr6, through hardened, precision machining of hardened surface, chrome coated.

Decoiler: mechanical or motorised, manual expansion.

Cutting Tools: Stationary post cut. Hydraulic pump (415V, 2.2kW). 2 options:

1. Fixed mould, 45º cut, with waste chute (see video below).
2. Three interchangeable moulds, (straight cut, 45º left, 45º right), no waste material. Mould changeover time is approximately 3 minutes.

Production Speed: 18m/min

Production Capacity: 900 linear metres per hour

Coil Width: 160mm

Thickness: 0.55mm or 0.75mm (cyclonic)

45º cut roof batten

Roof batten profile

45º cutting moulds

45º cut with waste

Please contact us for more information.